Restoration and refinishing
What is the difference between deck restoration and deck refinishing?
Refinishing is the finish work: stripping, sanding and restaining. Restoration is the whole project, which usually includes an inspection, cleaning, repairs to boards, rails and stairs, and then refinishing.
Can a deck that has been neglected for years be restored?
Usually. Gray, rough wood is weathered only on the surface, and sanding exposes sound wood underneath. What matters is the structure. If the frame passes inspection, the surface can almost always be brought back.
How long do I have to stay off the deck after staining?
Light foot traffic is usually fine after 24 hours and furniture can go back after 48 to 72 hours, depending on the product, temperature and humidity. We give you exact times for the stain we use.
Will sanding remove all the old stain?
Stripping removes most of an old coating and sanding takes care of the rest on the floor. Tight spots between balusters may keep traces of old color, which a semi-solid or solid stain will cover.
Do you use oil-based or water-based stain?
Both have their place. We mostly use penetrating oil and hybrid formulas because they soak in and do not peel in a freeze and thaw climate. We recommend a specific product after seeing your wood.
Repairs and safety
My deck feels bouncy. Is it safe?
Bounce can mean undersized or over-spanned joists, a failing beam or a loose connection. It is worth an inspection before you host a crowd. Many causes can be fixed with added blocking, sistered joists or a new post and footing.
How do I know if my deck is properly attached to the house?
Look where the deck meets the house. You should see the heads of bolts or structural screws in the ledger board, not just nails, and metal flashing above it. If you see only nails or cannot tell, have it inspected.
Can you fix rot in the frame without replacing the deck?
Often. Individual joists can be sistered or replaced and posts can be swapped out. Rot in the ledger or widespread rot in the joists changes the math toward replacement.
Cost, scheduling and weather
How far ahead should I book?
Spring and early fall fill first. Booking three to five weeks ahead in season is typical. Repairs that affect safety are scheduled sooner.
What happens if it rains?
We watch the forecast closely and reschedule staining days when rain is likely, since stain needs dry wood and a dry day or two afterward. Carpentry can often continue in light weather.
Do you require a deposit?
Small jobs are paid on completion. Larger projects with special-order materials have a deposit and progress payments, all spelled out in the written estimate.
Can you work on my deck in winter?
Inspections, estimates and many carpentry repairs can be done in winter. Staining and sealing resume in spring once temperatures stay above 50 degrees.
Materials
Is cedar or pressure-treated pine better for a deck in Rhode Island?
Pressure-treated pine is stronger and cheaper and is the right choice for framing. For the surface, cedar is more stable and better looking but softer. Both last when they are kept sealed.
Is composite decking really maintenance free?
Low maintenance is more accurate. Composite needs no sanding or staining, but it should be washed once or twice a year and shoveled with a plastic shovel.
Can you stain mahogany or ipe?
Yes. Dense hardwoods take specialized penetrating oils applied in thin coats, and they need more frequent maintenance coats to hold their color. Left unsealed, they weather to a silver gray.
The basics
How much does deck restoration cost in Rhode Island?
Most full refinishing jobs in the Providence area run $4 to $8 per square foot, which is about $1,600 to $3,200 for a 400 square foot deck. A wash and restain on a deck in good shape runs $2 to $4.50 per square foot. Repairs, railings and stairs are priced after a free on-site inspection.
Can my old gray deck be restored, or does it need to be replaced?
If the frame is solid, almost any weathered deck can be restored. Gray color, rough boards and peeling stain are surface problems. Replacement is only needed when the ledger, joists, posts or footings are failing, and we check all of those for free before recommending anything.
When is the best time to stain a deck in Rhode Island?
The season runs from late April into October. Stain needs dry wood, temperatures above 50 degrees and no rain for a day or two. Spring and early fall are ideal, and we book those weeks early.
How long does a deck restoration take?
Most refinishing jobs take two to four working days, spread around drying time and weather. Simple wash and stain jobs take one to two days. Board, rail and stair repairs are usually done in the same visit.
How often should a deck be sealed in New England?
Plan on a maintenance coat every two to three years for the floor and every three to five years for railings. Decks in full sun, near the bay or under heavy shoveling may need attention sooner.
Still have a question?
Call (401) 485-3885 or send the form. For pricing, see the deck restoration cost guide. For what we do, see deck restoration services and deck repair.
Last updated November 21, 2026